Mud pump liners are an essential component of drilling operations, asthey directly impact the effciency and productivity of the entire process.These liners create a seal between the piston and the fluid chamberallowing for the smooth circulation of drilling fluids. without properliners, leakage can occur, leading to a loss of drilling fluids anddecreased drilling efficiency. Additionally, […]
Category: Blog
How Triplex Mud Pump Work?
Triplex mud pumps are specialized in oil and gas industry for drilling works. It is used to move the drilling fluid, which is also referred to as drilling mud through the drill string to the surface during the time of drilling. They are made in a way that can be handled high pressure and high […]
Mud Pump Seat Puller Basic Operating Instructions
A hydraulic valve seat puller is a service tool. It is used to take the installed mud pump valve seat out of the mud pump fluid end module, during the process of replacing the valve seat or mud pump maintenance. At the same time, eliminate damage to fluid end expendables caused by removing the valve […]
Mud Pump and Mud Circulation System
Mud Pump and Mud Circulation System 🔻1. Mud Pumps: 🔻2. Mud Tanks (Pits): 🔻3. Mud Mixing Unit: 🔻4. Shale Shakers: 🔻5. Desander and Desilter: 🔻6. Degasser: 🔻7. Mud Cleaner: 🔻8. Mud Return Line: 🔻9. Rotary Hose / Kelly Hose: 🔻10. Standpipe and Swivel: 🔶 Mud Circulation Process 🔻1. Injection: Mud is pumped from the mud […]
The Novatech Story
Novatech, Building Quality Valves & Seats Since 1982Novatech is one of the oldest valve & seat manufacturers in the US; first welding valves for National Supply in 1982. Novatech’s Modern Manufacturing PlantNovatech’s state-of-the-art plant in Dallas,Texas, is the most efficient valve and seat manufacturing facility in the world, including CNC Lathes, Robotic Gantry Loading Machines, […]
Coil Tubing Operations in Stuck Wells
Using coil tubing in stuck wells is an effective method for retrieving stuck equipment and maintaining well integrity. Here’s a comprehensive guide on how coil tubing is used in such operations: Coil Tubing Operations in Stuck Wells: Benefits of Using Coil Tubing:
Coiled Tubing Max Speed
The maximum speed of coiled tubing can vary depending on the specific equipment, but typically ranges between 100 to 250 feet per minute with some high-performance units reaching speeds as high as 250 ft/min at minimum displacement, while maintaining a lower speed at maximum displacement; always consult the manufacturer’s specifications for the exact maximum speed […]
Comprehensive Introduction To Coiled tubing Operations
The coiled tubing unit has evolved into a portable, compact and efficient unit that eliminates the problem of making and breaking connections going in and out of the hole. It uses a continuous length of variously sized tubing that is stored on a reel. The length is usually sufficient to reach the well’s total depth […]
Coiled Tubing Milling Job Main Problem and Solutions
In coiled tubing milling, we remove block or deposits in wellbore. Milling by coiled tubing is difficult work. Downhole area is changing, and mechanical and hydraulic problems come often. Main problems we see in CT milling and ways to solve them: Cause: Solution: Cause: Solution: Solution: Cause: Solution: Solution: Solution: In coiled tubing milling, many […]
Coiled Tubing Introduction
In the oil and gas industry, coiled tubing refers to a long metal pipe, normally 1 to 3.25 in (25 to 83 mm) in diameter which is supplied spooled on a large reel. It is used for interventions in oil and gas wells and sometimes as production tubing in depleted gas wells. Coiled tubing is […]