A hydraulic valve seat puller is a service tool. It is used to take the installed mud pump valve seat out of the mud pump fluid end module, during the process of replacing the valve seat or mud pump maintenance. At the same time, eliminate damage to fluid end expendables caused by removing the valve […]
Author: GOSCO Energy
Mud Pump and Mud Circulation System
Mud Pump and Mud Circulation System 🔻1. Mud Pumps: 🔻2. Mud Tanks (Pits): 🔻3. Mud Mixing Unit: 🔻4. Shale Shakers: 🔻5. Desander and Desilter: 🔻6. Degasser: 🔻7. Mud Cleaner: 🔻8. Mud Return Line: 🔻9. Rotary Hose / Kelly Hose: 🔻10. Standpipe and Swivel: 🔶 Mud Circulation Process 🔻1. Injection: Mud is pumped from the mud […]
The Novatech Story
Novatech, Building Quality Valves & Seats Since 1982Novatech is one of the oldest valve & seat manufacturers in the US; first welding valves for National Supply in 1982. Novatech’s Modern Manufacturing PlantNovatech’s state-of-the-art plant in Dallas,Texas, is the most efficient valve and seat manufacturing facility in the world, including CNC Lathes, Robotic Gantry Loading Machines, […]
Coil Tubing Operations in Stuck Wells
Using coil tubing in stuck wells is an effective method for retrieving stuck equipment and maintaining well integrity. Here’s a comprehensive guide on how coil tubing is used in such operations: Coil Tubing Operations in Stuck Wells: Benefits of Using Coil Tubing:
Coiled Tubing Max Speed
The maximum speed of coiled tubing can vary depending on the specific equipment, but typically ranges between 100 to 250 feet per minute with some high-performance units reaching speeds as high as 250 ft/min at minimum displacement, while maintaining a lower speed at maximum displacement; always consult the manufacturer’s specifications for the exact maximum speed […]
Comprehensive Introduction To Coiled tubing Operations
The coiled tubing unit has evolved into a portable, compact and efficient unit that eliminates the problem of making and breaking connections going in and out of the hole. It uses a continuous length of variously sized tubing that is stored on a reel. The length is usually sufficient to reach the well’s total depth […]
Coiled Tubing Milling Job Main Problem and Solutions
In coiled tubing milling, we remove block or deposits in wellbore. Milling by coiled tubing is difficult work. Downhole area is changing, and mechanical and hydraulic problems come often. Main problems we see in CT milling and ways to solve them: Cause: Solution: Cause: Solution: Solution: Cause: Solution: Solution: Solution: In coiled tubing milling, many […]
Coiled Tubing Introduction
In the oil and gas industry, coiled tubing refers to a long metal pipe, normally 1 to 3.25 in (25 to 83 mm) in diameter which is supplied spooled on a large reel. It is used for interventions in oil and gas wells and sometimes as production tubing in depleted gas wells. Coiled tubing is […]
Coiled Tubing Injector Head & Gooseneck
Injector Head is one of the seven major components of coiled tubing unit. Injector Head-FunctionRun, Pull and hold CT string inside the well bore. Injector Head-capacity & main componentsInjector comes with the pulling capacity of 40, 60, 80, 100 and 160 thousand lbs.Main components of Injector Head include.*Gooseneck*Chain system*Drive and brake system*Weight measurement system Gooseneck […]
Coiled Tubing String and Work Reel
Coiled Tubing Properties Outer Diameter1.5″1.75″2″ Wall Thickness0.109″0.134″0.145″0.156″0.175″0.188 etc. Yield Strength70,000 psi80,000 psi90,000 psi100,000 psi110,000 psi Coiled Tubing Reel Two main functions*Store coiled tubing string*Fluid pumping provisionComponents*Reel drum*Reel drive and brake system*Level wind assembly*Depth counter assembly*Reel swivel and manifold*Lubrication system*Crash protection frame