NOV 9P100 Triplex Mud Pump Parts Manual List 9-P-100
| SUCTION THRU POWER END | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req |
| 101 | 1293072 | WIPER, L.H. Gear Oil | 1 |
| 1293073 | WIPER, R.H. Gear Oil | 1 | |
| 102 | 6310060 | NUT, 3/8″ Flexloc No. 20FA-616 | 4 |
| 103 | 7000210-11 | SCREW, 3/8″ x 1-1/2″ Grande 5 Cadmium Plated Hex Head Cap | 4 |
| 104 | 7621024 | WASHER, 3/8″ N Type A 0.812″ O.D. Cadmium Plated | 8 |
| 105 | 1293069 | BRACE, Oil Trough | 1 |
| 106 | 1293070 | TROUGH,L.H.Pinion Oil | 1 |
| 1293071 | TROUGH,R.H.Pinion Oil | 1 | |
| 107 | 2400040 | SCREW, 3/8″ x 3/4″ Drilled Head | 8 |
| 108 | 1291093 | COVER,Inspection | 2 |
| 109 | 1291094 | GASKET, Inspection Cover | 2 |
| 110 | 7000303-11 | SCREW,1/2″ x 1″ Grade 5 Cadmium Plated Hex Head Cap | 20 |
| 111 | 7815057 | PLUG, 1″ Magnetic Post Lisle No.PM-313 | 2 |
| 112 | 6300103 | NUT, 5/8″ Cadmium Plated Hex | 34 |
| 113 | 7619058 | WASHER, 5/8″ Regular Spring Lock Cadmium Plated | 34 |
| 114 | 7621040 | WASHER, 5/8″ N Type A 1.312″ O.D. Cadmium Plated | 34 |
| 115 | 1293095 | GASKET, Main Frame Cover | 1 |
| 116 | 7817170 | RUBBER,Neoprene Sponge 3/16″ x 2″ 0′-24″ long | 2 |
| 117 | 1293082 | WIPER, Left Hand Gear and Pinion Oil | 1 |
| 1293089 | WIPER,Right Hand Gear and Pinion Oil | 1 | |
| 118 | 6310060 | NUT,3/8″ Flexloc No.20FA-616 | 4 |
| 119 | 7000209-11 | SCREW,3/8″ x 1-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 120 | 7621024 | WASHER,3/8″ N Type A 0.812″ O.D. Cadmium Plated | 8 |
| 121 | 1291179 | TROUGH,Left Hand Crosshead Lube Oil | 1 |
| 122 | 1290078 | GASKET,Wrench Hole Cover | 3 |
| 123 | 1290077 | COVER,Wrench Hole | 2 |
| 124 | 7000208-11 | SCREW,3/8″ x 1″ Grade 5 Cadmium Plated Hex Head Cap | 24 |
| 125 | 1290110 | COVER,Center Wrench Hole | 1 |
| 126 | 7802020 | CAP,Donaldson No.S-183 Breather | 1 |
| 127 | 7000567-10F | SCREW,1-1/8″ – 12 x 3-3/4″ Grade 5 Hex Head Cap | 6 |
| 128 | 1290075 | COVER, Top Access | 3 |
| 129 | 1290076 | GASKET,Top Access Cover | 3 |
| 130 | 7000303-11 | SCREW, 1/2″ x 1″ Grade 5 Cadmium Plated Hex Head Cap | 18 |
| 131 | 1290251 | SCREW, Oil Passage | 3 |
| 132 | 1293016 | SHIELD, Intermediate Rod Oil | 3 |
| 133 | 6310040 | NUT,1/4″ Flexloc No.20FA-420s | 6 |
| 134 | 6320062 | NUT,3/8″ Hex Jam | 3 |
| 135 | 7000114-11 | SCREW,1/4″ x 2-1/2″ Grade 5 Cadmium Plated Hex Head Cap | 6 |
| 136 | 7621016 | WASHER, 1/4″ N Type A 0.625″ O.D. Cadmium Plated | 12 |
| 137 | 1291074 | BOLT,Hook | 9 |
| 138 | 1293009 | RETAINER, intermediate Rod Oil Wiper | 3 |
| 139 | 1293078 | GASKET,Intermediate Rod Oil Wiper Retainer | 3 |
| 140 | 6541612 | PIN, 1/4″ x 1-1/2″ Groove ANSI Type C | 9 |
| 141 | 7805052 | FITTING, 1/8″ Alemite No.1610 B | 3 |
| 142 | 7805062 | FITTING, 1/8″ Alemite No.43716 | 3 |
| 143 | 1293182 | WIPER,Intermediate Rod Oil | 12 |
| 144 | G-1293114 | PLATE,Oil Wioer Retaining | 6 |
| 145 | 1293141 | SPACER,Oil Wiper | 6 |
| 146 | G-7061091-17 | SCREW,#10-24 x 5/8″ Zinc Plated Hex Head Machine | 18 |
| 147 | 7619025 | WASHER,#10 Cadmium Plated Regular Spring Lock | 18 |
| 148 | 1293038 | ROD,Intermediate | 3 |
| 149 | 7000307-11 | SCREW,1/2″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | 12 |
| 150 | 1293079 | GASKET,Oil Wiper Retainer Plate | 3 |
| 151 | 1293023 | PLATE,Oil Wioer Retaining | 3 |
| 152 | 7621032 | WASHER,1/2″ N Type A 1.062″ O.D.Cadmium Plated | 12 |
| 153 | 1283190 | PLATE,Clean-Out | 2 |
| 154 | 1283191 | GASKET,Clean-Out Plate | 2 |
| 155 | 7000304-11 | SCREW,1/2″ x 1-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 12 |
| 156 | 6800163 | BUSHING, 2″ x 1″ Standard C.I.Hex | 1 |
| 157 | 7815057 | PLUG, 1″ Magnetic Post Lisle No.PM-313 | 1 |
| 158 | 1284106 | GASKET,Oil Gage Plate | 1 |
| 159 | 1291130 | PLATE,Oil Gage | 1 |
| 160 | 2400029 | DIPSTICK,Oil Level | 1 |
| 161 | 7000208-11 | SCREW,3/8″ x 1″ Grade 5 Cadmium Plated Hex Cap | 12 |
| 162 | 7618014 | WASHER, Stat-O-Seal Parker No.600-0101-3/8″ | 12 |
| SECTION THRU CRANKSHAFT | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 201 | 1293081 | RETAINER, Main Bearing Cage Oil | 2 |
| 202 | 5506202 | BOLT,3/8″ x 3/4″ Place | 16 |
| 203 | 2401960 | SCREW,7/8″ x 2-3/4″ Drilled Head | 48 |
| 204 | 1293011 | CAGE,Main Bearing | 2 |
| 205 | 2400690 | SCREW,3/8″ x 1″ Drilled Head | 24 |
| 206 | 7600024 | WASHER,3/8″ N Type A 0.812″ O.D. | 24 |
| 207 | 1293012 | CAP,Main Bearing End | 2 |
| 208 | ZT-13127 | BEARING,Main | 2 |
| 209 | 1293096 | GASKET,Main Bearing End Cap | 2 |
| 210 | 1293021 | RING,Main Bearing Lock | 2 |
| 211 | 1293104 | SHIM, .020″ Main Bearing Lock Ring ( Yellow ) | 8 |
| 1293105 | SHIM, .0075″ Main Bearing Lock Ring ( Clear ) | 8 | |
| 1293106 | SHIM, .005″ Main Bearing Lock Ring ( Blue ) | 14 | |
| G-1293110 | SHIM, 1/8″ Main Bearing Lock Ring ( Steel ) | 2 | |
| 212 | 1293100 | SHIM, .020″ Connecting Rod Bearing Retainer Plate ( Yellow ) | 9 |
| 1293101 | SHIM, .0075″ Connecting Rod Bearing Retainer Plate ( Clear ) | 18 | |
| 1293102 | SHIM, .005″ Connecting Rod Bearing Retainer Plate ( Blue ) | 27 | |
| 213 | 6310120 | NUT, 3/4″ -10 UNC Flexloc No.31FA-1210 | 6 |
| 214 | 7000462-11 | SCREW,3/4″ x 7-1/2″,Grade 5 Cadmium Plated Hex Head Cap | 6 |
| 215 | 1293026 | PLATE, Connecting Rod Bearing Retainer | 12 |
| 216 | 2405025 | SCREW,3/4″ x 5-3/4″ Drilled Head | 24 |
| 217 | 1293061 | RETAINER, Connecting Rod Bearing Outer | 3 |
| 218 | 1293107 | SHIM, .020″ Connecting Rod Bearing Outer Retainer ( Yellow ) | 3 |
| 1293108 | SHIM, .0075″ Connecting Rod Bearing Outer Retainer ( Clear ) | 9 | |
| 1293109 | SHIM, .005″ Connecting Rod Bearing Outer Retainer ( Blue ) | 9 | |
| 219 | ZB-25500 | BEARING,Connecting Rod | 3 |
| 220 | 1293007 | ROD,Connecting | 3 |
| 221 | 1293062 | PLATE,Connecting Rod Bearing Retainer | 3 |
| 222 | 1293005 | CRANKSHAFT | 1 |
| 223 | 2400710 | SCREW,3/4″ x 2-1/2″ Drilled Head | 12 |
| 224 | 1293008 | GEAR, Crankshsft | 1 |
| 225 | 1293006 | BOLT,Crankshaft Gear | 12 |
| 226 | 6310140 | NUT,7/8″-Flexloc #31FA-1409 | 12 |
| 227 | 7400842 | TUBING,1/2″O.D. x 3/8″ I.D. x 21″ Long Cold Drawn Seamless Steel | 2 |
| 228 | 7804146 | EBLOW, 90° Male Weatherhead No.7405 x 8 | 2 |
| 229 | G-7804202 | EBLOW, 45° Male Weatherhead No.7355 x 8 | 2 |
| 230 | 1283147 | SHIM, .005″ Main Bearing Support ( Steel Shim Stock ) | 4 |
| 1283148 | SHIM, .007″ Main Bearing Support ( Steel Shim Stock ) | 2 | |
| 231 | 1293014 | SPACER,Main Bearing Support | 2 |
| 232 | 6310320 | NUT, 2″ -8 UNC Flexloc 30FO-3208 | 2 |
| 233 | 1293024 | BOLT,Main Bearing Support | 2 |
| 234 | 2405026 | SCREW,1-1/8″ x 3-1/4″ Drilled Head | 8 |
| 235 | 1293022 | PLATE, Main Bearing Retainer | 2 |
| 236 | 1293152 | SHIM, 1/16″ Main Bearing Retainer Plate | 6 |
| 1293153 | SHIM, .020″ Main Bearing Retainer Plate | 4 | |
| 1293154 | SHIM, .005″ Main Bearing Retainer Plate | 8 | |
| SECTION THRU PINION AND CROSSHEADS | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 301 | 1293090 | CROSSHEAD, Left Hand | 1 |
| 302 | 7000394-11 | SCREW, 5/8″ x 1-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 8 |
| 303 | 7618022 | WASHER, Stat-O-Seal Parker No.600-0101-5/8″ | 8 |
| 304 | 7000443-11 | SCREW, 3/4″ x 2-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 6 |
| 305 | 7611036 | WASHER, 3/4″ Locomotive Hi-Crome Light Series Spring | 6 |
| 306 | 5506714 | BOLT, 3/4″ x 2-1/2″ Place | 6 |
| 307 | 1293113 | COVER,Crosshead Hand Hole | 2 |
| 308 | 1293112 | RETAIER, Crosshead pin | 3 |
| 309 | ZB-7120 | BEARING, Crosshead pin | 3 |
| 310 | 1290114 | SHIM, Crosshead pin Retainer | 6 |
| 311 | 1290089 | CONDUCTOR,Oil | 3 |
| 312 | 2402680 | SCREW,5/8″ x 2″ Drilled Head | 32 |
| 313 | 7600040 | WASHER, 5/8″ N Type A 1.312″ O.D. Cadmium Plated | 32 |
| 314 | YS-7752 | SEAL, Pinion Bearing Oil | 2 |
| 315 | 1293020 | RETAINER,Pinion Bearing Oil | 2 |
| 316 | 1293097 | GASKET, Bearing Retainer | 2 |
| 317 | ZB-7873 | BEARING, Pinion | 2 |
| 318 | 1293018 | CAGE,Left Hand Pinion Bearing | 1 |
| 319 | 1293027 | PLATE, Pinion Bearing Cage | 2 |
| 320 | 2400930 | SCREW, 5/8″ x 1-3/4″ Drilled Head | 8 |
| 321 | 7600040 | WASHER, 5/8″ N Type A 1.312″ O.D. | 8 |
| 322 | 2402580 | SCREW,7/8″ x 3-1/2″ Drilled Head | 18 |
| 323 | 7618026 | WASHER, Stat-O-Seal Parker No. 600-0101-7/8″ | 36 |
| 324 | 1293015 | CROSSHEAD, Center and Right Hand | 2 |
| 325 | 1293010 | PINION | 1 |
| 326 | 6912020 | RING,Eaton No.XAN-700 Retaining | 3 |
| 327 | 1293019 | CAGE, Right Hand Pinion Bearing | 1 |
| 328 | 2404074 | KEY,1-1/4″ x 1-3/4″ x 16″ Long | 1 |
| 329 | 1293017 | LINER, Crosshead | 6 |
| 330 | 1293028 | PIN, Crosshead | 3 |
| 331 | 1277810 | RING, Crosshead Pin Bearing Snap | 6 |
| 332 | 6875003 | PLUG, 3/8″ Standard Countersunk | 3 |
| 333 | 1293103 | SHIM,Crosshead Liner | 15 |
| 334 | 2405007 | SCREW, 7/8″ x 3-1/4″ Drilled Head | 18 |
| 335 | 6873008 | PLUG, 1″Standard Cored Square Head Pipe | 1 |
| SECTION THRU ROD CHAMBER AND CYLINDER | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 401 | 6310040 | NUT, 1/4″ Flexloc No. 20FA-420 | 15 |
| 402 | 7000111-11 | SCREW, 1-1/4″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 15 |
| 403 | 7621016 | WASHER, 1/4″ N Type A 0.625″ O.D. Cadmium Plated | 15 |
| 404 | 1293085 | CLAMP COMPLETE, Rod | 6 |
| Composed of: | |||
| 1–1293086 CLAMP ONLY, Rod | |||
| 2–G-1290087 CONNECTOR, Rod Clamp | |||
| 2–1290088 PIN, Rod Clamp | |||
| 2–6309080 NUT, 1/2″ Maclean-Fogg 22TWA-1213 Lock | |||
| 4–6571014 PIN, 5/32″ x 7/8″ Spring Slot Steel | |||
| 2–7000312-11 SCREW, 1/2″ x 3″Grade 5 Cad. Plated Hex Head Cap | |||
| 405 | See Page 26 | LINER, Bi-Metal | 3 |
| 406 | 1293166 | CLAMP COMPLETE, Liner | 3 |
| Composed of: | |||
| 1–1293167 CLAMP ONLY,Liner | |||
| 2–G-1290168-P CONNECTOR, Liner Clamp | |||
| 2–1290169 PIN,Liner Clamp | |||
| 2–6309120 NUT, 3/4″ Maclean-Fogg 22TWA-3410 Lock | |||
| 4–6571420 PIN, 7/32″ x 1-1/4″ Spring Slot Steel | |||
| 2–7000448-11 SCREW, 3/4″ x 4″ Grade 5 Cad. Plated Hex Head Cap | |||
| 407 | 2408018 | STUD,1″ x 5-7/8″ Top Taper Lock | 18 |
| 6300160 | NUT, 1″ Heavy Hex | 18 | |
| 408 | 1293130 | COVER COMPLETE, Rod Chamber | 3 |
| Composed of: | |||
| 1–1293227 COVER ONLY | |||
| 1–1290406 HINGE, Cover | |||
| 5–7041102 SCREW, 1/4″ x 3/8″ 100 Deg. Flat Head Mchine | |||
| 409 | 1293165 | BUSHING, Liner | 3 |
| 410 | 2408019 | STUD, 1-3/8″ x 7-1/4″ Top Taper Lock | 72 |
| 6300220 | NUT, 1-3/8″ Heavy, Hex | 72 | |
| 411 | 1290174 | RETAINER,Valve Cover Seal | 6 |
| 412 | 1290307 | COVER,Valve | 6 |
| 413 | 1290315 | WASHER,Wedge Adjusting Screw | 6 |
| 414 | 1290178 | SCREW,Wedge Adjusting | 6 |
| 415 | 6300160 | NUT, 1″ Heavy Hex | 6 |
| 416 | 1290308 | RING, Threaded | 6 |
| 417 | G-1290376 | WEDGE COMPLETE, Plug Locking | 6 |
| Composed of: | |||
| 6–G-1290179-P CASTING, Wedge, Investment | |||
| 1–1290181 SPRING, Wedge Retaining | |||
| 418 | 1540126 | SEAL, Valve Cover | 6 |
| 419 | 1292140 | HOLDER, Valve Guide Insert | 6 |
| 420 | 1292141 | INSERT, Valve Guide | 6 |
| 421 | 1560701 | SPRING,Valve | 6 |
| 422 | See Page 26 | VALVE | 6 |
| 423 | 1561450 | SEAT,Valve | 6 |
| 424 | 1590051 | SEAT,Suction Manifold | 3 |
| 425 | 7000483-11 | SCREW, 7/8″ x 2-1/2″ Grade 5 Cadmium Plated Hex Head Cap | 24 |
| 426 | 1293173 | MANIFOLD, Front Inlet Sution | 1 |
| or | 1293180 | MANIFOLD,Dampener Complete, Double Side Inlet Suction | 1 |
| Composed of: | |||
| 1–1293181 MANIFOLD,Dampener Only | |||
| 1–5902449 FLANGE, 8″ ASA 150 Ib. Blind R.J. | |||
| 1–6908041 RING, R48-Oval Joint | |||
| 8–7000445-11 SCREW, 3/4″ x 3-1/4″ Grade 5 Cad,Plated Hex Head Cap | |||
| 1–6817124 NIPPLE,2″ x 5-1/2″ Standard Pipe | |||
| 2–6874016 PLUG,2″Soild Square Head Pipe | |||
| 1–6888016 TEE, 2” Standard M.I. Pipe | |||
| Items, 1101-1115 sa illustrarted on page 22 are also included | |||
| 427 | 6511416 | PIN,7/8″ x 2″ Standard Hardened and Ground Dowel | 6 |
| 428 | 1290344 | SEAL, Module | 6 |
| 429 | 1290357 | PLATE,Wear | 3 |
| 430 | See Page 26 | PACKING,Liner | 3 |
| 431 | 2408030 | STUD, 1-1/4″ x 6″ Top Taper Lock | 24 |
| 6300200 | NUT, 1-1/4″ Heavy Hex | 24 | |
| 432 | 6308241 | NUT, 1-1/2″-8N-3 Elastic Stop No. X59-1781-2408 | 3 |
| 433 | See Page 26 | PISTON | 3 |
| 434 | 1293147 | ROD,Piston | 3 |
| 435 | 1293146 | SUBROD,Piston | 3 |
| SECTION THRU DISCHARGE OUTLET TOP VIEW OF ROD CHAMBERS AND CYLINDERS | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 501 | 1293240 | MODULE STUDDED, Discharge | 3 |
| Composed of: | |||
| 1–1293241 MODULE ONLY, Discharge | |||
| 6–2408018 STUD, 1″ x 5-7/8″ Top Taper Lock | |||
| 6–6300160 NUT, 1″ Heavy Hex | |||
| 12–2408019 STUD, 1-3/8″ x 7-1/4″ Top Taper Lock | |||
| 12–6300220 NUT, 1-3/8″ Heavy Hex | |||
| 8–2408030 STUD, 1-1/4″ x 6″ Top Taper Lock | |||
| 8–6300200 NUT, 1-1/4″ Heavy Hex | |||
| 6–2408034 STUD, 1-1/2″ x 19-1/8″ Top Taper Lock | |||
| 6–6300241 NUT, 1-1/2″-8UN-3A Heavy Hex | |||
| 502 | 1290338 | MODULE STUDDED, Suction | 3 |
| Composed of: | |||
| 1–1290339 MODULE ONLY, Suction | |||
| 12–2408019 STUD, 1-3/8″ x 7-1/4″ Top Taper Lock | |||
| 12–6300220 NUT, 1-3/8″ Heavy Hex | |||
| 503 | 5912370 | FLANGE, 4″ API-5000 Ib. WN RJ with 3.152 Bore | 1 |
| 504 | 6908033 | RING, R39-D Oval Joint | 1 |
| 505 | 2402560 | TUD, 1-1/4″ x 6-1/4″ Bottom Taper Lock | 8 |
| 6300200 | NUT, 1-1/4″ x Heavy Hex | 8 | |
| 506 | 1293243 | SPACER STUDDED, Discharge | 2 |
| Composed of: | |||
| 1–1293244 SPACER ONLY, Discharge | |||
| 8–2402560 STUD, 1-1/4″ x 6-1/4″ Bottom Taper Lock | |||
| 8–6300200 NUT, 1-1/4″ Heavy Hex | |||
| 507 | 1290342 | CONNECTOR,Discharge | 2 |
| 508 | 1290175 | RING, Back-Up | 4 |
| 509 | 7000305-11 | SCREW, 1/2″ x 1-1/2″ Grade 5 Cadmium Plated Hex Head Cap | 16 |
| 510 | 7619050 | WASHER, 1/2″ Regular Spring Lock Cadmium Plated | 16 |
| 511 | 1290343 | ADAPTER, Discharge Connector | 2 |
| 512 | 2410031-348 | PACKING,Rectanbgular | 2 |
| 513 | 2410031-427 | PACKING,Rectanbgular | 4 |
| 514 | 2407142 | PLATE,Valve Cover Instruction | 1 |
| 515 | 7178025 | SCREW, Round Head Drive Type U No.2 x 1/4″ | 8 |
| 516 | 2408034 | STUD, 1-1/2″ x 19-18″ Top Taper Lock | 18 |
| 6300241 | MUT, 1-1/2″ -8UN-3A Heavy Hex | 18 | |
| 517 | 5912373 | FLANGE, 4″ API-5000 #. Blind with RJ Face | 1 |
| 518 | 7006606 | SCREW, 1-1/4″ x 3″ Hex Socket Head Cap | 16 |
| 519 | 6908033 | RING, R39-D Oval Joint | 1 |
| 520 | 1290345 | SEAL, Discharge Spacer | 2 |
| 521 | G-2407274 | PLATE,Warning | 1 |
| 522 | 6829016 | ELBOW, 90 Deg. x 2″ standard M.I. Street | 2 |
| 523 | 1293194 | BAFFLE,Intermediate Rod-1/2 Piece | 6 |
| 524 | 6300041 | NUT, 1/4″ Cadmium Plated Hex | 6 |
| 525 | 7000124-11 | SCREW, 1/4″ x 5″ Grade 5 Cadmium Plated Hex Head Cap | 6 |
| 526 | 7621016 | WASHER, 1/4″ N Type A 0.625″ O.D. Cadmium Plated | 12 |
| 1293115 PISTON-LINER SPRAY SYSTEM | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 601 | 1293193 | MANIFOLD COMPLETE, Piston-Liner Sparay | 3 |
| Includes items indicated by* | |||
| *602 | G-7818256 | SCREW, 3/8″ -16 x 1-3/4″ 18-8 Stainless Steel Thumb | 9 |
| *603 | 7813050 | NUT, 3/8″ -16 18-8 Stainless Steel Wing | 9 |
| *604 | 7815099 | PLUG, 1/2″ 150 Ib. 316 Stainless Steel Hex Head Cap | 6 |
| *605 | 7006204-30 | SCREW, 3/8″ x 1/2″ Stainless Steel Hex Socket Head Cap | 18 |
| *606 | 1291193 | NOZZLE,Spray | 18 |
| *607 | 7804075 | ELBOW, 90° x 1/2″ – 150 Ibs. 316 Stainless Steel Street | 3 |
| 608 | G-2400075 | HOSE ASSEMBLY, 1/2″ x 16-1/2″ Long | 3 |
| 609 | 6800083 | BUSHING, 1″ x 1/2″ Standard M.I. Hex | 3 |
| 610 | 6829004 | ELBOW, 90° x 1/2″ Standard M.I. Street | 3 |
| 611 | 7815094 | PLUG, 1/2″ Hansen No. B4-T25 Male Pipe Thread | 3 |
| 612 | 7818282 | SOCKET, 1/2″ Hansen No. 4-S26 Female Pipe Thread | 3 |
| BELT DRIVEN PISTON-LINER LUBE SYSTEM | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 701 | 1293077 | SHEAVE, Lube Pump Drive | 1 |
| 702 | 7027206-02 | SCREW, 3/8″ x 3/4″ Hex Socket Head Cup Point Nyloc Set | 2 |
| 703 | 1293098 | CAP, Pinion Shaft End | 1 |
| 704 | 4701112 | BELT, A-112″V” | 1 |
| 705 | 1293067 | GUARD, Left Hand “V” Belt (For Left Hand Drive ) | 1 |
| 1293068 | GUARD, Right Hand “V” Belt (For Right Hand Drive ) | 1 | |
| 706 | 7000301-11 | SCREW,1/2″ x 3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 707 | 7621032 | WASHER, 1/2″ N Type A 1.062″ O.D. Cadmium Plated | 4 |
| 708 | 6800120 | BUSHING, 1-1/2″ x 1″ Standard C.I. Hex | 1 |
| 709 | 6817079 | NIPPLE, 1″ x 4-1/2″ Standard Pipe | 1 |
| 710 | 6826008 | ELBOW, 90° x 1″ Standard M.I. | 1 |
| 711 | 7815072 | PUMP, B & S No. 3 Foot Mounting without Relief Valve 713-3-1 | 1 |
| 712 | 2401620 | KEY, 3/16″ Square x 1″ Long | 1 |
| 713 | 7200038 | SHEAVE, Singel “A” Grove 4-1/2″ O.D. | 1 |
| 714 | 1293080 | RAIL,Sump Support | 2 |
| 715 | 6300081 | NUT, 1/2″ Cadmium Plated Hex | 8 |
| 716 | 7035305-01 | SCREW,1/2″ x 1-1/2″ Cadmium Plated Flat Head Machine | 8 |
| 717 | 7619050 | WASHER,1/2″ Cadmium Plated Regular Spring Lock | 8 |
| 718 | 7621032 | WASHER,1/2″ N Type A 1.062″ O.D.Cadmium Plated | 8 |
| 719 | 1293063 | SUMP,Lube Oil | 1 |
| 720 | 1293076 | STRAINER,Lube Oil Sump | 1 |
| 721 | 1289358 | HOSE ASSEMBLY, 1″ x 24″ Long | 3 |
| 722 | 6829008 | ELBOW, 90° x 1″Standard M.I.Street | 7 |
| 723 | 1275228 | HOSE ASSEMBLY, 1″ x 45-1/2″ Long | 1 |
| 724 | 1286036 | HOSE ASSEMBLY, 1″ x 33-1/4″ Long | 1 |
| 725 | 6830022 | ELBOW, 90° x 1″ x 3/4″ Standard M.I. Reducing Street | 2 |
| 726 | 7000259-11 | SCREW,7/16″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 727 | 7619045 | WASHER,7/16″ Cadmium Plated Regular Spring Lock | 4 |
| 728 | 1292065 | BRACKET, Lube Pump Nounting | 1 |
| 729 | 1290064 | PLATE,Back-Up | 1 |
| 730 | 7000304-11 | SCREW,1/2″ x 1-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 2 |
| 731 | 7619050 | WASHER, 1/2″ Cadmium Plated Regular Spring Lock | 2 |
| 732 | 7621032 | WASHER, 1/2″ N Type A 1.062″ O.D. Cadmium Plated | 2 |
| ELECTRIC MOTOR DRIVEN PISTON-LINER SPRAY SYSTEM | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 3 801 | 5902091 | FLANGE, 1″ ASA 150 Ib. Threaded Flat Face | 1 |
| 3 802 | 6010037 | GASKET, 1″ J-M 76 150 Ib. 1/16″ with Holes Full Face | 1 |
| 3 803 | 7000307-11 | SCREW, 1/2″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 3 804 | 6300081 | NUT, 1/2″ Cadmium Plated Hex | 4 |
| 3 805 | 7619050 | WASHER, 1/2″ Cadmium Plated Regular Spring Lock | 4 |
| 806 | 6829008 | ELBOW, 90° x 1″ Standard M.I. Street | 1 |
| 807 | 6817076 | NIPPLE, 1″ x 3″ Standard Pipe | 1 |
| 808 | 6859008 | CROSS, 1″ Standard Pipe | 1 |
| 809 | 7806002 | GAUGE, Glycerine 2-1/2″ 0-1– PSI 1/4″ N.P.T. | 1 |
| 810 | 6800081 | BUSHING, 1″ x 1/4″ Standard M.I. Hex | 1 |
| 811 | 6873008 | PLUG, 1″ Standard Cored Square Head | 1 |
| 812 | 1289358 | HOSE ASSEMBLY, 1″ x 24″ Long ( For Rear Mounted Pump Drive ) | 1 |
| or | 1270115 | HOSE ASSEMBLY, 1″ x 32″ Long ( For Top Mounted Pump Drive ) | 1 |
| 813 | 7800070 | ADAPTER, Male Pipe Gates No.7253-86737 | 1 |
| 814 | 1292284 | SUPPORT, Piston-Liner Spray Pump | 2 |
| 815 | 1292294 | HOSE ASSEMBLY, 1-1/2″ x 26″ Long | 1 |
| 816 | 6310120 | NUT, 3/4″ -10 UNC Flexloc No.31FA-1210 | 4 |
| 817 | 7000439-11 | SCREW, 3/4″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 818 | 7621044 | WASHER, 3/4″ N Type A 1.469″ O.D. Cadmium Plated | 4 |
| 3 819 | 7815147 | PUMP, 1″ x 1-1/2″ Centrifugal | 1 |
| 820 | 6839008 | ELBOW, 45° x 1″ Standard M.I. Street ( For Rear Mounted Pump Drive ) | 1 |
| or | 6829008 | ELBOW, 90° x 1″ Standard M.I. Street ( For Top Mounted Pump Drive ) | 1 |
| 821 | 1293080 | RAIL,Sump Support | 2 |
| 822 | 6300081 | NUT, 1/2″ Cadmium Plated Hex | 8 |
| 823 | 7035305-01 | SCREW, 1/2″ x 1-1/2″ Cadmium Plated Flat Head Machine | 8 |
| 824 | 7619050 | WASHER, 1/2″ Cadmium Plated Regular Spring Lock | 8 |
| 825 | 7621032 | WASHER, 1/2″ N Type A 1.062″ O.D. Cadmium Plated | 8 |
| 826 | 1293063 | SUMP,Piston-Liner Spray | 1 |
| 827 | 6829008 | ELBOW, 90° x 1″ Standard M.I. Street | 6 |
| 828 | 1293076 | STRAINER,Lube Sump | 1 |
| 829 | 1289358 | HOSE ASSEMBLY, 1″ x 24″ Long | 3 |
| 3 830 | 5902172 | FLANGE, 1-1/2″ ASA 150 Ib. Threaded Flat Face | 1 |
| 3 831 | 6010036 | GASKET, 1-1/2″ J-M 76 150 Ib. 1/16″ with Holes Full Face | 1 |
| 3 832 | 7000309-11 | SCREW, 1/2″ x 2-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 3 833 | 6300081 | NUT, 1/2″ Cadmium Plated Hex | 4 |
| 3 834 | 7619050 | WASHER, 1/2″ Cadmium Plated Regular Spring Lock | 4 |
| 3 835 | 1292283 | SHIM, Pump ( Laminated ) | 4 |
| 3 836 | 7000396-11 | SCREW, 5/8″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 3 837 | 2401860 | KEY, 1/4″ Square x 1-1/4″ Long | 2 |
| 3 838 | 7802327 | COUPLING, Falk Type T – 10 Size 20T 10 1-1/8″ Bore | 1 |
| 3 839 | 1292286 | GUARD,Coupling | 1 |
| 3 840 | 7000207-11 | SCREW,3/8″ x 7/8″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 3 841 | 7600026 | WASHER, 3/8″ W Type A 1.000″ O.D. | 4 |
| 3 842 | 7000211-11 | SCREW,3/8″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 3 843 | 6300062 | NUT, 3/8″ Cadmium Plated Hex | 4 |
| 3 844 | 7619041 | WASHER, 3/8″ Cadmium Plated Regular Spring Lock | 4 |
| 3 845 | 1292293 | WASHER, 1/4″ x 1-3/4″ Square | 4 |
| 3 846 | 1292285 | BASE,Pump and Motor | 1 |
| 3 847 | 7812008 | 230/460 V Motor, 3 HP 182TC 60 Hz 1735 RPM 3 PH | 1 |
| or | 7812009 | 575 V Motor, 3 PH 182 TC 60 Hz 1735 RPM 3 PH | 1 |
| 1292288 | PUMP COMPLETE,Piston-Liner Spray with 230/460 V Motor. Includes Items Listed Above Indicated by 3 ( Service Item ). | ||
| 1292309 | PUMP COMPLETE,Piston-Liner Spray with 575 V Motor. Includes Items Listed Above Indicated by 3 ( Service Item ). | ||
| BELT DRIVEN RIGHT ANGEL PISTON-LINER LUBE SYSTEM | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 901 | 7000301-11 | SCREW, 1/2″ x 3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 902 | 7621032 | WASHER, 1/2″ N Type A 1.062″ O.D. Cadmium Plated | 4 |
| 903 | G-1293171 | GUARD, Left Hand Gear Box Sheave | 1 |
| or | G-1293170 | GUARD, Right Hand Gear Box Sheave | 1 |
| 904 | G-7000254-11 | SCREW, 7/16″ x 3/4″ Grade 5 Cadmium Plated Hex Head Cap | 2 |
| 905 | 7619045 | WASHER, 7/16″ Regular Spring Lock Cadmium Plated | 2 |
| 906 | 7016421 | SCREW, 5/8″ x 8″ Square Head Cup Point Set | 1 |
| 907 | 6320100 | NUT, 5/8″ Hex Jam | 1 |
| 908 | 7802358 | CONNECTOR,Weatherhead No. C5205 x 24 | 2 |
| 909 | 7805072 | FITTING, 1-1/2″ No. 411-24S Swivel Female | 2 |
| 910 | 1293076 | STRAINER, Lube Oil Sump | 1 |
| 911 | 1293063 | SUMP,Lube Oil | 1 |
| 912 | 1293080 | RAIL,Lube Sump Support | 2 |
| 913 | 6300081 | NUT, 1/2″ Cadmium Plated Hex | 8 |
| 914 | 7035305-01 | SCREW, 1/2″ x 1-1/2″ Cadmium Plated Flat Head Machine | 8 |
| 915 | 7619050 | WASHER, 1/2″ Regular Spring Lock Cadmium Plated | 8 |
| 916 | 7621032 | WASHER, 1/2″ N Type A 1.062″ O.D. Cadmium Plated | 8 |
| 917 | G-1291252 | BRACKET, Right Angle Drive Liner Spray Pump Complete Mounting | 2 |
| With the Following Replaceable Items: | |||
| 2–6300103 NUT, 5/8″ Cadmium Plated Hex | |||
| 1–6320120 NUT, 3/4″ Hex Jam | |||
| 2–7000397-11 SCREW, 5/8″ x 2″ Grade 5 Cad. Plated Hex Head Cap | |||
| 1–7014456-01 SCREW, 3/4″ x 6″ Square Head Full Dog Point Set | |||
| 2–7619058 WASHER, 5/8″ Regular Spring Lock Cadmium Plated | |||
| 2–7621042 WASHER, 5/8″ W Type A 1.750″ O.D. Cadmium Plated | |||
| 918 | 6300103 | NUT, 5/8″ Cadmium Plated Hex | 4 |
| 919 | 7000397-11 | SCREW, 5/8″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 920 | 7619058 | WASHER, 5/8″ Regular Spring Lock Cadmium Plated | 4 |
| 921 | 7621042 | WASHER, 5/8″ W Type A 1.750″ O.D. Cadmium Plated | 4 |
| 922 | 6828012 | ELBOW, 45° x 1-1/2″ Standard M.I. | 1 |
| 923 | 6817076 | NIPPLE, 1″ x 4″ Standard Pipe | 1 |
| 924 | 6817112 | NIPPLE, 1-1/2″ x 4″ Standard Pipe | 1 |
| 925 | 6839008 | ELBOW, 45° x 1″ Standard M.I. Street | 1 |
| 926 | 6888008 | TEE, 1″ Standard M.I. Street | 1 |
| 927 | 6829008 | ELBOW, 90° x 1″ Standard M.I. Street | 1 |
| 928 | 6817076 | NIPPLE, 1″ x 3″ Standard Pipe | 1 |
| 929 | 6800081 | BUSHING, 1″ x 3″ Standard M.I.Hex | 1 |
| 930 | 7806002 | GAGE,Glycerin 2-1/2″ 0-100 PSI 1/4″ NPT | 1 |
| 931 | 4701112 | BELT, “V” A-112 | 2 |
| 932 | G-1293169 | GUARD, Left Hand “V” Belt | 1 |
| or | G-1293168 | GUARD, Right Hand “V” Belt | 1 |
| 933 | 7027206-02 | SCREW, 3/8″ x 3/4″ Hex Socket Cup Point Nyloc Set | 2 |
| 934 | 1293077 | SHEAVE, Lube Pump | 1 |
| 935 | 1293098 | CAP, Pinion Shaft End | 1 |
| 936 | 6829008 | ELBOW, 90° x 1″ Standard M.I. Street | 6 |
| 937 | 1289358 | HOSE ASSEMBLY, 1″ x 24″ Long | 1 |
| 938 | 7805083 | FITTING, Aeroquip No. 411-16S | 2 |
| 939 | 7800076 | ADAPTER, Aeroquip No. 2021-16-16S | 2 |
| 940 | 6100037 | HOSE, Aeroquip No. 2651-24 0′-27″ Long | 1 |
| 941 | 6826008 | ELBOW, 90° x 1″ Standard M.I. | 1 |
| 942 | 6100036 | HOSE, Aeroquip No. 2651-16 0′-24″ Long | 1 |
| 943 | G-1291258 | COVER, Cross Shaft | 1 |
| 944 | 2401860 | KEY, 1/4″ Square x 1-1/4″ Long | 1 |
| 945 | G-7200046 | SHEAVE, 3.6″ P.D. “A” 2 Groove with “SH” O.D. Hub | 1 |
| 946 | G-1291157 | PUMP COMPLETE, See Page 20 | 1 |
| PISTON-LINER LUBE PUMP G-1291157 ( RIGHT ANGLE DRIVE ) | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 1001 | G-7806090 | GEAR BOX, Von Ruden Model 55-19 Type E/G 2:1 Reduction Ratio | 1 |
| 1002 | 7801121 | BREATHER, Bendix No.568699 | 1 |
| 1003 | 2401860 | KEY, 1/4″ x 1/4″ x 1-1/4″ Plain | 2 |
| 1004 | G-7802332 | COUPLING, Bondtru No.B-323 W/1-1/8″ and 1″ Bore | 1 |
| 1005 | 1292286 | GUARD, Coupling | 1 |
| 1006 | 7815147 | PUMP, 1″ x 1-1/2″ Centrifugal | 1 |
| 1007 | 6300081 | NUT, 1/2″ Cadmium Plated Hex | 10 |
| 1008 | 7000307-11 | SCREW, 1/2″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 1009 | 7619050 | WASHER, 1/2″ Regular Spring Lock Cadmium Plated | 10 |
| 1010 | 5902091 | FLANGE, 1″ ASA 150 Ib. Threaded Flat Face | 1 |
| 1011 | 6010037 | GASKET, 1″ J-M 76 150 Ib. 1/16″ w / Holes Full Face | 1 |
| 1012 | 7000309-11 | SCREW, 1/2″ x 2-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 1013 | 5902172 | FLANGE, 1-1/2″ ASA 150 Ib. Threaded Flat Face | 1 |
| 1014 | 6010036 | GASKET, 1-1/2″ J-M 76 150 Ib. 1/16″ w / Holes Full Face | 1 |
| 1015 | G-1292283 | SHIM, Pump | 4 |
| 1016 | 6300103 | NUT, 5/8″ -11UNC Cadmium Plated Hex | 4 |
| 1017 | 7000398-11 | SCREW, 5/8″ x 2-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 1018 | 7619058 | WASHER, 5/8″ Cadmium Plated Regular Spring Lock | 4 |
| 1019 | 7000206-11 | SCREW, 3/8″ x 3/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 1020 | 7621024 | WASHER, 3/8″ Type A 0.81″ O.D. Cadmium Plated | 4 |
| 1021 | 7000306-11 | SCREW, 1/2″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | 2 |
| 1022 | G-1291158 | BRACKET, Centrifugal Pump and Gear Box Mounting | 1 |
| 1023 | G-1291159 | PEDESTAL, Gear Box | 1 |
| 1024 | 7000257-11 | SCREW, 7/16″ x 1-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 4 |
| 1025 | 7619045 | WASHER, 7/16″ Cadmium Plated Regular Spring Lock | 4 |
| 1026 | G-7624021 | WASHER, 1/2″ I.D. X 1-1/4″ O.D. x .217″ Thick Special Flat | 4 |
| SECTION THRU SUCTION LINER DAMPENER AIR CHUCK AND COUPLING SUCTION LINE RELIEF VALVE | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 1101 | 1290198 | RETAINER, Suction Line Dampener Diaphragm | 1 |
| 1102 | 1290199 | GASKET, Dampener | 2 |
| 1103 | 7000361-11 | SCREW, 9/16″ x 4″ Grade 5 Cadmium Plated Hex Head Cap | 32 |
| 1104 | 7621036 | WASHER, 9.16″ N Type A 1.159″ O.D. Cadmium Plated | 32 |
| 1105 | 2410031-024 | PACKING, Rectangular Section | 2 |
| 1106 | 1290197 | COVER, Suction Line Dampener | 1 |
| 1107 | 1290195 | DIAPHRAGM, Suction Line Dampener | 1 |
| 1108 | 1290228 | GUARD, Air Valve | 1 |
| 1109 | 7500021 | VALVE, 1/4″ Dill No. 02500-100AA-643VC Check | 1 |
| 1110 | 7815106 | PLUG, Tedeco Model No. W-54 Sight | 2 |
| 1111 | 1290196 | SPACER, Suction Line Dampener | 1 |
| 1112 | 2407136 | PLATE, Instruction | 1 |
| 1113 | 7178025 | SCREW, No. 2 x 1/4″ Type U Round Head Drive | 8 |
| 1114 | 7802028 | CHUCK, 1/4″ Dill No. 6044 Air | 1 |
| 1115 | 7802029 | COUPLING, Dill No.6094 Air Chuck | 1 |
| 1116 | 7500065 | VALVE, Relief Texstream Series 55-RO Set At 70 PSI | 1 |
| * | 1290203 | DAMPENER, Double Flanged 8″ Suction Line | 1 |
| Composed of: | |||
| 1–1290200 BODY COMPLETE, Double Flanged 8″ Suction Line Dampener | |||
| 8–6300121 NUT, 3/4″ Cadmium Plated Hex | |||
| 2–6908041 RING, R48-D Oval Joint | |||
| 8–7000445-11 SCREW, 3/4″ x 3-3/4″ Grade 5 Cad. Plated Hex Head Cap | |||
| 8–7000448-11 SCREW, 3/4″ x 4″ Grade 5 Cad. Plated Hex Head Cap | |||
| 2–6874016 PLUG,2″ Standard Soild Square Head | |||
| 1–6817121 NIPPLE, 2″ x 3″ Standard Pipe | |||
| 1–6888016 TEE, 2” Standard Pipe | |||
| Items, 1101 thru 1115 are also included | |||
| * | 1290212 | DAMPENER, Single Flanged 8″ Suction Line | 1 |
| Composed of: | |||
| 1–1290213 BODY COMPLETE, Single Flanged 8″ Suction Line Dampener | |||
| 1–6908041 RING, R48-Oval Joint | |||
| 8–7000445-11 SCREW, 3/4″ x 3-3/4″ Grade 5 Cad. Plated Hex Head Cap | |||
| 1–6874016 PLUG, 2″ Standard Solid Square Head | |||
| Items, 1101 thru 1115 are also included | |||
| * | 1290277 | DAMPENER, Right Hand Side Inlet 8″ Suction Line | 1 |
| Composed of: | |||
| 1–1290275 BODY COMPLETE, Right Hand Side Inlet 8″ Suction Line Dampener | |||
| 1–6010023 GASKET, 8″ Flat Ring | |||
| 8–6300121 NUT, 3/4″ Cadmium Plated Hex | |||
| 1–6908041 RING, R48-Oval Joint | |||
| 16–7000445-11 SCREW, 3/4″ x 3-1/4″ Grade 5 Cad. Plated Hex Head Cap | |||
| 1–6874016 PLUG, 2″ Standard Solid Square Head | |||
| Items, 1101 thru 1115 are also included | |||
| * | 1290278 | DAMPENER, Left Hand Side Inlet 8″ Suction Line | 1 |
| Composed of: | |||
| 1–1290279 BODY COMPLETE, Left Hand Side Inlet 8″ Suction Line Dampener | |||
| 1–6010023 GASKET, 8″ Flat Ring | |||
| 8–6300121 NUT, 3/4″ Cadmium Plated Hex | |||
| 1–6908041 RING, R48-Oval Joint | |||
| 16–7000445-11 SCREW, 3/4″ x 3-1/4″ Grade 5 Cad. Plated Hex Head Cap | |||
| 1–6874016 PLUG, 2″ Standard Solid Square Head | |||
| Items, 1101 thru 1115 are also included | |||
| * | 1290208 | DAMPENER, Suction Line for Field Installation to 10″ Pipe | 1 |
| Composed of: | |||
| 1–1290209 PLATE, Mounting | |||
| Items, 1101 thru 1115 are also included | |||
| * | 1290210 | DAMPENER,Suction Linefor Field Installation to 8″ Pipe | 1 |
| Composed of: | |||
| 1–1290211 PLATE, Mounting | |||
| Items, 1101 thru 1115 are also included | |||
| * One Furnished with Pump — Type and Size Optional | |||
| TOOLS FURNISHED — NOT ILLUSTRATED | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 1290140 | ADAPTER,Pinion Rotating | 1 | |
| 7000394-11 | SCREW, 5/8″ x 1-1/4″ Grade 5 Cadmium Plated Hex Head Cap | 3 | |
| 7619058 | WASHER, 5/8″ Regular Spring Lock Cadmium Plated | 3 | |
| 2402290 | WRENCH, Pinion Rotating Adapter | 1 | |
| 1290183 | PULLER COMPLETE, Seal Retainer | 1 | |
| Composed of: | |||
| 1–1290182 PULLER ONLY | |||
| 1–2408021 STUD, 3/4″ x 1-1/2″ Straight ALL-Thread | |||
| 1–6572024 PIN, 5/16 x 1-1/2″ Stainless Steel Spring | |||
| 1290207 | BOLT, Liner Clamp Tee Handle Lifting ( 4″ Long ) | 1 | |
| 1290206 | BOLT, Liner Clamp Tee Handle Lifting ( 3″ Long ) | 1 | |
| G-7815046 | PULLER, Bluebonnet Model NP-2100 Valve Seat | 1 | |
| 1291181 | DRIVER, Fluid Valve Seat | 1 | |
| Composed of: | |||
| 1–1291223 COVER, Guide | |||
| 1–1291224 DRIVER ONLY,Fluid Valve Seat | |||
| 1292278 | HOLDER, Seal Retainer | 1 | |
| 1710270 | BAR, Wedge Loosening | 1 | |
| 2409010 | WRENCH, Wedge Adjusting Screw | 1 | |
| 2409011 | WRENCH, for 2409010 | 1 | |
| 1290164 | PLATE, Bushing Puller | 1 | |
| M-1023 | WRENCH, Piston Rod Nut | 1 | |
| OPTIONAL ITEMS — NOT ILLUSTRATED | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 1293125 | HOIST COMPLETE | 1 | |
| Composed of: | |||
| 2–1290127 BRACKET, Hoist Support | |||
| 1–1293126 BOOM, Hoist | |||
| 1–1291128 MAST, Hoist | |||
| 2–1293129 ROD, Hoist Support | |||
| 4–6320120 NUT, 3/4″ Hex Jam | |||
| 2–7000395-11 SCREW, 5/8″ x 1-1/2″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 2–7000440-11 SCREW, 3/4″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 2–7619058 WASHER, 5/8″ Regular Spring Lock Cadmium Plated | |||
| 2–7619066 WASHER, 3/4″ Regular Spring Lock Cadmium Plated | |||
| 4–7800044 ASSEMBLY, Yoke Pin 2708-1/2-8A | |||
| 4–7804019 END, Adjustable Yoke 2708-8A | |||
| 1–7805052 FITTING, Alemite No.1610B | |||
| 1–7819040 TROLLEY, 1/2 Ton Plain Yale Model FW | |||
| 1293274 | STROKE COUNTER SWITCH | 1 | |
| Composed of: | |||
| 1–1290273 BRACKET, Switch | |||
| 1–1290324 CONDUIT, Switch Wire | |||
| 2–6300041 NUT, 1/4″ Cadmium Plated Hex | |||
| 2–6300062 NUT, 3/8″ Cadmium Plated Hex | |||
| 1–6829004 ELBOW, 90° x 1/2″ Standard M.I. Street | |||
| 1–6839004 ELBOW, 45° x 1/2″ Standard M.I. Street | |||
| 2–7000106-11 SCREW, 1/4″ x 3/4″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 2–7000212-11 SCREW, 3/8″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 2–7618014 WASHER, Parker No. 600-0101-3/8″ Stat-O-Seal | |||
| 2–7619033 WASHER, 1/4″ Regular Spring Lock Cadmium Plated | |||
| 2–7619041 WASHER, 3/8″ Regular Spring Lock Cadmium Plated | |||
| 1–7818203 SWITCH, Micro EX-Ar | |||
| 1–7822068 WIRE, Romex Cable 14/3″ Type NM 600V 22″ Long | |||
| OPTIONAL ITEMS — NOT ILLUSTRATED | |||
| ITEM No. | PART NO. | DESCRIPTION | No. Req’d. |
| 1293174 | CROSS COMPLETE, Discharge Strainer ( 4″ Outlets ) | 1 | |
| Composed of: | |||
| 1–1291208 CROSS ONLY, Discharge Strainer | |||
| 1–1291212 STRAINER, Complete | |||
| 24–2402560 STUD, 1-1/4″ x 6-1/4″ ( For 4″ API-5000 Ib. Flange ) | |||
| 24–6300200 NUT, 1-1/4″ Heavy Hex | |||
| 1–2407004 TAG, Strainer Cleanout | |||
| 2–7178088 SCREW, 3/8″ – # 10 Type U Round Head Drive | |||
| 4–102842-1 SHIM, 1/8″ Thick | |||
| 3–102842-2 SHIM, 1/16″ Thick | |||
| 4–102842-3 SHIM, 1/32″ Thick | |||
| 1–1293176 SUPPORT, Discharge Strainer Cross | |||
| 1–1290221 PLATE, Support Base | |||
| 4–7000439-11 SCREW, 3/4″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 4–7000440-11 SCREW, 3/4″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 8–7619066 WASHER, 3/4″ Regular Spring Lock Cadmium Plated | |||
| 1291214 | KIT,Flange and Gasket ( Used on 1293174 Cross ) | ||
| Composed of: | |||
| 1–1290305 FLANGE, Strainer Clean Out | |||
| 2–5912370 FLANGE, 4″ API-5000 Ib. with 3.152″ Bore Weld Neck Ring Joint | |||
| 4–6908033 RING, R39-D Oval Joint | |||
| 1293175 | CROSS COMPLETE, Discharge Strainer ( 5″ Outlets ) | 1 | |
| Composed of: | |||
| 1–1290311 CROSS ONLY, Discharge Strainer | |||
| 1–1291212 STRAINER, Complete | |||
| 8–2402560 STUD, 1-1/4″ x 6-1/4″ | |||
| 16–2408017 STUD, 1-1/2″ x 7-3/4″ | |||
| 8–6300200 NUT, 1-1/4″ Heavy Hex | |||
| 16–6300240 NUT, 1-1/2″ Heavy Hex | |||
| 1–2407004 TAG, Strainer Clean-Out | |||
| 2–7178088 SCREW, 3/8″ – # 10 Type U Round Head Drive | |||
| 4–102842-1 SHIM, 1/8″ Thick | |||
| 3–102842-2 SHIM, 1/16″ Thick | |||
| 4–102842-3 SHIM, 1/32″ Thick | |||
| 1–1293176 SUPPORT | |||
| 1–1290221 PLATE, Support Base | |||
| 4–7000439-11 SCREW, 3/4″ x 1-3/4″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 4–7000440-11 SCREW, 3/4″ x 2″ Grade 5 Cadmium Plated Hex Head Cap | |||
| 8–7619066 WASHER, 3/4″ Regular Spring Lock Cadmium Plated | |||
| 1290312 | KIT,Flange and Gasket ( Used on 1293175 Cross ) | ||
| Composed of: | |||
| 1–1290305 FLANGE, Strainer Clean Out | |||
| 2–5912393 FLANGE, 5″ API-5000 Ib. with 4.313″ Bore Weld Neck Ring Joint | |||
| 2–6908033 RING, R39-D Oval Joint | |||
| 2–6908040 RING, R44-D Oval Joint | |||
| 1290313 | KIT,Flange and Gasket ( Used on 1293175 Cross ) | ||
| Composed of: | |||
| 1–1290305 FLANGE, Strainer Clean Out | |||
| 2–5912391 FLANGE, 5″ API-5000 Ib. with 4.063″ Bore Weld Neck Ring Joint | |||
| 2–6908033 RING, R39-D Oval Joint | |||
| 2–6908040 RING, R44-D Oval Joint | |||
