Author: GOSCO Energy

Coiled Tubing Stripper

Stripper in CT used as primary barrier to isolate well pressure. However, stripper has many types to suit different conditions and we will talk about all of them in brief 1-Conventional stripper : basic design, difficult to change stripper inserts. pressure assisted to seal.2-Side door stripper: easier to change stripper inserts, not pressure assisted in […]

Surface Well Testing Equipment – Choke Manifold

From the wellhead, once the flow passes through the safety systems, it gets to the choke manifold — and this is where real control begins. The choke manifold is used to:-Control well flow rate-Reduce high wellhead pressure gradually-Protect downstream equipment-Maintain stable test conditions-Instead of allowing the well to flow freely, the choke helps us “tame” […]

Surface Well Testing Equipment – Indirect Heat Exchanger

One piece of equipment I’ve come to really appreciate during surface well testing is the indirect heat exchanger. On location, its job is simple but extremely important: -Prevent hydrate formation and stabilize the well effluent before separation. What it is?The indirect heat exchanger is a heating vessel Where:The well effluent flows through a spiral coil, […]

Surface Well Testing Equipment – 3 Phase Test Separator

One of the most important piece of equipment I’ve been operating during surface well testing is the 3-phase test separator. After the well stream passes through the choke and indirect heater, it enters the separator — and this is where the real measurement begins. What it does?The 3-phase separator is designed to separate the well […]

Surface Well Testing Equipment – Surge Tank

Another important piece of equipment I’ve been observing during surface well testing is the Surge Tank. After separation in the 3-phase separator, the oil phase flows into the surge tank. Although it looks simple, it plays a very important role in stabilizing flow and ensuring accurate measurement. What is a Surge Tank?A surge tank is […]